Becker R40/17C Instruções de Operação

Becker-Antriebe GmbH35764 Sinn/Germanywww.becker-antriebe.comR8/17C PR+ - R40/17C PR+Assembly and Operating Instructions Tubular drives for roller shu

10Assembly and Operating InstructionsAction ResponseclackclackclackSetting the Final Positions via the Installation SetAttentionThe installation set i

11clackc) Anti-lifting device at the lower nal position to upper bufferMove both switches to the program-ming position.Travel downwards until

12Assembly and Operating InstructionsclackclackclackclackDeleting the nal positions via the installation seta) Deleting one nal position if two na

13Technical DataType R8/17C PR+ R12/17C PR+ R20/17C PR+ R30/17C PR+ R40/17C PR+Nominal torque (Nm) 8 12 20 30 37Output speed (min-1) 17 17 17 17 17Lim

14Assembly and Operating InstructionsWhat to do if...?Problem Cause RemedyTubular drive overruns the end limit or does not reach the set end limit..1

15Subject to technical changes without noticeSample wiring diagramControlling one/several drive(s) via a single switch/buttonBlackBrownBlueGreen-Yello

16Assembly and Operating Instructions2010 300 326 0c 08/09 3. Setting the upper nal positiona: To upper buffer Travel the shutter upwards ag

2Assembly and Operating InstructionsTable of ContentsGeneral ...

3Structural modications and incorrect installation which are not in accordance with these and our other instructions can result in serious injuries,

4Assembly and Operating InstructionsIntended useThe R8/17C PR+ - R40/17C PR+ tubular drives are intended solely for use in roller shutters. The tubul

52Assembly of the Becker connecting cable (Fig. 1)Ensure the Becker connecting cable is de-energised before proceeding. In-sert the cable into the dri

6Assembly and Operating Instructions563. Before tting in the barrel, take the measurement from barrel end to the centre of the drive adapter and mar

7Setting the Final PositionsThere are 4 ways to set the nal positions:a) Lower position to upper position without bufferb) Lower position to upper

8Assembly and Operating Instructionsb) Lower position to upper bufferActuate a brief start command.Travel to the desired lower nal position.Move the

9a) Deleting the nal positions individuallyNoteIt is only possible to delete an individual nal position if lower position to upper position withou